bed ki ela?

[VinPetrol]

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

 

[Thokkalee]

5 minutes ago, VinPetrol said:

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

You need to setup more support.. you can either do it on your own by buying from Home Depot (some carpenter work needed) or get it from ikea.. 

[Thokkalee]

https://www.lowes.com/pd/1-in-x-4-in-x-8-ft-Whitewood-Furring-Strip/5014776457?store=2878&cm_mmc=shp-_-b-_-prd-_-pro-_-ggl-_-LIA_LUM_000_PRO-_-5014776457-_-local-_-0-_-0&gad_source=1&gclsrc=ds

https://www.lowes.com/pd/2-x-2-x-8-Premium-Furring-Strip/5002632019?store=2878&cm_mmc=shp-_-c-_-prd-_-lum-_-ggl-_-CRP_SHP_LIA_LUM_Online_C-D-_-5002632019-_-local-_-0-_-0&gad_source=1&gclsrc=ds

 

Get few 1x4’s - at least 3 or 4 for additional support… get 1 or two 2x2 and cut them to your bed size and screw them.. it should look something like this.. the more support you have the better it is… if you have kids who jump on the bed a lot, you need lot more support 

[shaktimaan]

13 minutes ago, VinPetrol said:

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

 

atleast for me flat base like plywood feels better than slats, get measurements and buy plywood with atleast 3/4" thickness, shouldn't be that expensive. homedepot will cut it for you. Use some drywall screws to screw it to the bedframe

[The_Mentalist]

12 minutes ago, VinPetrol said:

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

 

Ni title susi edho chex related topic ani came

@DaatarBabu2 bed meedha forila pix post pls

[VinPetrol]

5 minutes ago, Thokkalee said:

https://www.lowes.com/pd/1-in-x-4-in-x-8-ft-Whitewood-Furring-Strip/5014776457?store=2878&cm_mmc=shp-_-b-_-prd-_-pro-_-ggl-_-LIA_LUM_000_PRO-_-5014776457-_-local-_-0-_-0&gad_source=1&gclsrc=ds

https://www.lowes.com/pd/2-x-2-x-8-Premium-Furring-Strip/5002632019?store=2878&cm_mmc=shp-_-c-_-prd-_-lum-_-ggl-_-CRP_SHP_LIA_LUM_Online_C-D-_-5002632019-_-local-_-0-_-0&gad_source=1&gclsrc=ds

 

Get few 1x4’s - at least 3 or 4 for additional support… get 1 or two 2x2 and cut them to your bed size and screw them.. 

got it thanks, malli slat ki kuda support kotali anukunta.. like you shown in the pic.

[Thokkalee]

4 minutes ago, VinPetrol said:

got it thanks, malli slat ki kuda support kotali anukunta.. like you shown in the pic.

Twin ki akkarledu anukuntaa.. but for queen and king beds, you need ground support.. Anduke 2x2 planks.. check the link above.. cut them at the same length as the existing support planks using a saw..

I added these for all my beds.. 

[VinPetrol]

4 hours ago, The_Mentalist said:

Ni title susi edho chex related topic ani came

@DaatarBabu2 bed meedha forila pix post pls

 for disappointing you  

[The_Mentalist]

25 minutes ago, VinPetrol said:

 for disappointing you  

Sarle

2 pix esthe compromise 

[ManchamKodi]

5 hours ago, VinPetrol said:

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

 

buy only bed in costco use it for 1 year and return it. enduku kasta padutavu ne bed veravallu use chestaru next year

[socrates]

8 hours ago, shaktimaan said:

atleast for me flat base like plywood feels better than slats, get measurements and buy plywood with atleast 3/4" thickness, shouldn't be that expensive. homedepot will cut it for you. Use some drywall screws to screw it to the bedframe

plywood will leads to long term back pain issues

if plywood is really that viable solution we would have seen all cots with plywood

[shaktimaan]

9 minutes ago, socrates said:

plywood will leads to long term back pain issues

if plywood is really that viable solution we would have seen all cots with plywood

there are many manufacturers here who use flat base instead of slats. Look into high end Japanese beds. The kind of mattress you use matters not the bed for back issues. downside is it traps moisture for a heavy sweater but not really a big deal 

[pandugadu999]

9 hours ago, VinPetrol said:

oka Bed frame konna... only 3 slats isthe(one starting, middle and last one at end)... how to put matters on it? atleast they should have give slats 10 to 12 instead of 3.. box spring pettina, it won't hold the weight kada.. am I missing somthing?😪  ( I am trying to upload the frame pic.. m not sure how to upload here.. any idea bro)

 

Amazon lo konkova slats

[MeetFriendz]

10 hours ago, Thokkalee said:

https://www.lowes.com/pd/1-in-x-4-in-x-8-ft-Whitewood-Furring-Strip/5014776457?store=2878&cm_mmc=shp-_-b-_-prd-_-pro-_-ggl-_-LIA_LUM_000_PRO-_-5014776457-_-local-_-0-_-0&gad_source=1&gclsrc=ds

https://www.lowes.com/pd/2-x-2-x-8-Premium-Furring-Strip/5002632019?store=2878&cm_mmc=shp-_-c-_-prd-_-lum-_-ggl-_-CRP_SHP_LIA_LUM_Online_C-D-_-5002632019-_-local-_-0-_-0&gad_source=1&gclsrc=ds

 

Get few 1x4’s - at least 3 or 4 for additional support… get 1 or two 2x2 and cut them to your bed size and screw them.. it should look something like this.. the more support you have the better it is… if you have kids who jump on the bed a lot, you need lot more support 

Bed frame yekada tesukunavu bro?

[VinPetrol]

13 hours ago, pandugadu999 said:

Amazon lo konkova slats

home depot lo konna..